This equipment provides a complete edge treatment, slitting and trim removal system.
It is a free-standing unit which may be incorporated into the user's process. Equipped with
electro-optical sensors and fast-response actuators which keep the active machine elements positioned properly with respect to the edge of the running fabric.
Features
A resin dispensing and applying system which stores the UV resin and dispenses it to the applicator system at an adjustable ratio proportional to fabric speed. The applicator applies a stripe of resin 1/4 wide at a point near the edge being followed by the sensor system and near the other edge at a preset, fixed distance from the first stripe.
An ultraviolet curing irradiator and light shield system cures the resin.
Slitting knives are used to shear the fabric to a precise width.
A pneumatic conveying system is used for the edge trim removal.
Typical Industrial Fabric Application
Fabric composition - "E" type glass with Silane treatment.
Fabric weight - 0.6 to 7.0 ounces per square yard.
Fabric process speed - up to 100 yards per minute.
Fabric width - 38 to 62 inches.
Resin application width - approximately 1/4" on each edge.
Slitting tolerances - ± 1/16 inch over a range of ± 1 inch.
No comments:
Post a Comment